Check all fasteners for proper torque. Even if something is not listed on the site, we probably have it in our warehouse! Our customers pay no customs, duties, or brokerage fees, ensuring that they get the lowest prices anywhere (domestically or internationally, some exclusions apply). 34. See Photo 35. DODGE, DODGE RAM, RAM TRUCKS, RAM 1500, SRT/10, 1500 SLT PLUS, 1500 SLT, ST, LARAMIE, DAYTONA, MEGA CAB, SLT/SPORT/TRX, SLT/TRX, R/T, SPORT, LARAMIE LONGHORN, TRADESMAN HEAVY DUTY, TRADESMAN/EXPRESS, TRADESMAN, HFE, REBEL, LONGHORN ARE REGISTERED TRADEMARKS OF FIAT CHRYSLER AUTOMOBILES (FCA). 7. Install the new knuckles using the stock hardware on the lower ball joints, making sure the half shafts are installed in the bearing assembly. To install the new e-brake bracket measure from the rear measure 1 5/8” and from the bottom measure up 1 3/8” and mark hole to be drilled. See Photo 33. Shop Parts in this Guide. 21. Remove the ABS wire from the bearing assembly using a 5mm allen wrench. 4. Using the stock hardware, install the strut spacers on the struts. 25. Remove tires and wheels using a 21mm socket. 16. Install the supplied 10mm studs in the strut spacers on the end with the smallest holes. The company’s full line of products is specially designed to fit your custom application.From lift kits to shock absorbers to steering stabilizers, Rough Country Suspension products ensure a smooth and comfortable driving experience. All Rights Reserved, Ownership does not affect chances of winning, (06-21 4WD RAM 1500 w/o Air Ride, Excluding Mega Cab), JLT 3.0 Black Oil Separator; Passenger Side, MotoFab 3-Inch Front / 2-Inch Rear Leveling Kit, Rough Country 6-Inch Suspension Lift Kit with Upper Strut Spacers (11-14 2WD/4WD F-150, Excluding Raptor), How to Install Rough Country 6 in. Just in time for the holidays, we've extended our normal 30-day return policy. 5. Remove the sway bar links from the sway bar using a 19mm wrench. Install the supplied blocks on the block pin holes on the axle and raise the axle into place. $137.93 - $275.93. Hang caliper out of way. 38. Loosen the lower ball joint using a 24mm wrench. See Photo 18. 14. See Photo 1 & 2. See Photo 21.Do not tighten at this time. Tighten the lower control arm bolts using a 1-1/16” wrench and socket. This must be done BEFORE installation is started. See Photo 8. At TDot Performance we offer the largest selection of rough country products in Canada. All manufacturer names, symbols, and descriptions used in our images and text are used solely for identification purposes only. Free & Fast Shipping. 23. On 2011 and newer models, remove the EPAS (Electronic Power Assist Steering) Plugs as shown. Install the front and rear cross-member using the factory hardware. See Photo 4. See Photo 27. Rough Country Speedometer Calibrator. 2. Trial fit the stock caliper bolts to make sure the caliper needs to drilled before drilling. See Photo 13, 1. 17. Swing up the sway bar and install on the sway bar drop brackets using the supplied 3/8” x 1” bolts, washers and nuts. Place jack stands under the frame rails and lower onto jack stands. You must have JavaScript enabled in your browser to utilize the functionality of this website. Rough Country HD2 Running Board. Retain factory hardware for reuse and remove the rotor. 46. Chock the front tires and jack the rear the rear end up. Tighten using a 19mm and 13mm socket / wrench. Check to ensure there is adequate clearance between all rotating, mobile, fixed and heated members. See Photo 28. This means you’ll enjoy the complete protection of the manufacturer's warranty when you place your purchase with us. Install the brake line extension bracket on the frame using the stock hardware and tighten using a 10mm wrench. $471.53 - $1,248.86. 45. Tighten with a 18mm socket. Secure the brake line to the new bracket with the supplied 5/16” x 3/4” bolt, washers and nut. If the stock bolt is 16mm the caliper mounting location will need to be enlarged using a 41/64” drill bit. You can bet that we’ll be the first to carry the latest and most sought after Rough Country Suspension Products. That’s how sure Rough Country is that you’ll love its products. Tighten using a 15mm socket. Select a vehicle to store in your garage. All components must be retightened after 500 miles, and every three thousand miles after installation. See Photo 4. See Photo 26. Exclusions apply. 15. Suspension Lift Kit on your F-150. $434.95 - $549.26. Conceived in this great nation, our company strives to meet the needs of all consumers for automotive parts, such as tires, bike racks, performance parts, and more, in Canada. Do not use air impact on the upper and lower ball joint, tighten with hand tools. Rough Country Wheel Installation Kit. Install the knuckle on the upper ball joint with the stock hardware and tighten using a 21mm and a 10mm wrench. Chock the rear wheels and jack up the front of the vehicle. Not only is the price a great price, but the install video completely sold me! Remove the wheels/tires using a 21mm socket. Have vehicle aligned by a certified alignment professional. See Photo 12. APO / FPO and Canadian, Guam, Puerto Rico, US Virgin Islands Customers: Unfortunately we are unable to guarantee shipping times to your addresses, so the above deadlines do not apply. 3. See Photo 17. See Photo 7 & 8. Remove rear shocks from the upper and lower mount using 18mm and a 15mm wrench. FORD, FORD F-150 & F-150, FORD RANGER, FORD LIGHTNING, SUPERCREW, SUPERCAB, POWER STROKE, TRITON V8, ECOBOOST, CHEVROLET, GMC, CHEVROLET SILVERADO, GMC SIERRA, SILVERADO, SIERRA, LS V8, DURAMAX, LTZ, SILVERADO LT, SILVERADO HD, SIERRA ALL TERRAIN X, ECOTEC3, Z-71, SILVERADO 1500, AND SILVERADO SS ARE REGISTERED TRADEMARKS OF GENERAL MOTORS COMPANY (GM). RMA numbers will be given out until 7:30 PM EST on January 25, 2021. 41. Retain hardware for reuse. Do not use air impact on the upper and lower ball joint, tighten with hand tools. Rough Country offers premium quality suspension products for your car, truck, or SUV! 13. 40. *Free Christmas Shipping is free / guaranteed to arrive by Christmas for the lower 48 states only. Install nut to hold the sway bar in place but do not tighten at this time. See Photo 1. On the driver side, pull slightly on the brake line to allow the line to be installed on the new bracket. 32. Tighten upper strut mount hardware using 17mm wrench. Install the e-brake cable in the new mount and reattach the e -brake cables on the frame. See Photo 7. See Photo 15. See Photo 16. 29. Tap lightly with a hammer to release ball joint from knuckle. Chock the rear wheels and jack up the front of the vehicle. Check steering gear for interference and proper working order. 1. 4. Using the supplied zip tie, secure the vacuum hose and ABS wire to the knuckle neck. Because we are a 100% Canadian owned and operated business, our customers always enjoy free shipping on all orders and are never asked to pay customs, duties, or border fees! Do not let caliper hang by brake hose as this will damage hose. If you reside in Canada and order your Rough Country products from us, you will pay no shipping, customs, duties, or border fees! JavaScript seems to be disabled in your browser. Install the upper leaf spring u-bolts on leaf spring and blocks. TDot Performance carries the brand’s complete product line at the lowest prices in Canada. Shop Lift Kits, Leveling Kits, LED Light Bars, Tonneau Covers, Bumpers, Fender Flares, Steps & Truck Accessories at the Lowest Prices. Install the tie rod end in the knuckle and tighten using a 21mm and 10mm wrench. Use a 17mm wrench or socket to pull the stud into place as shown in Photo 22. Retain hardware for reuse. Make sure the ABS wire are out of harms way. See Photo 25. See Photo 23. Tighten using a 30mm and 1-1/16” wrench. 24. Perform steering sweep. Install the new brake line bracket on the driver and passenger side with the stock hardware. Install the lower strut in the lower control arm using the factory hardware. 20. See Photo 20. 33. Install the sway bar drop brackets using the factory nuts and a 15mm wrench. 3. Install the new bracket as shown with the supplied 7/16” x 1” bolt, washers, nut in the factory hole and 5/16” x 3/4” bolt, washer and nut in the drilled hole. Torque to 200 ft/lbs. 28. TDot Performance is an authorized Canadian retailer of all Rough Country products. 6in X-series Suspension Lift Kit for 07-18 Jeep Wrangler JK Unlimited [68322] | Rough Country® All Rough Country products are designed and manufactured for the perfect fit and the best performance! 8. Retain hardware for reuse. This site uses cookies to provide you with the best experience possible. 31. Using a 10mm wrench remove the brake line bracket from the driver and pass side frame. Lower the vehicle to the ground. Place jack stands under the frame rails and lower onto jack stands. Install the tires and wheels using a 21mm socket. Guaranteed Free Delivery by 12/24!